ISO 10218, ISO 3691-4 and R15.08: what will an underwriter ask about the robots?
By Siddansh Bohra, CEO, Rayon · Last reviewed
ISO 10218 covers industrial robot arms and the cells built around them. ISO 3691-4 covers driverless industrial trucks, including autonomous mobile robots. ANSI/A3 R15.06 and R15.08 are the US standards for the same two families, and each now has a part written for the user. An insurance policy does not require any of them, and we know of no published rating plan that credits compliance. What an underwriter or loss-control rep will want is the paperwork they produce: which standard applies, the integrator's risk assessment, and evidence that the site still runs the way that assessment assumed.
Deploying robots for a customer? Attach our two-page insurance checklist to your SOW. Get the checklist
Which standard covers what
| Standard | Covers | Written mainly for |
|---|---|---|
| ISO 10218-1:2025 | The industrial robot itself, treated as partly completed machinery | Manufacturers, safety engineers and integrators |
| ISO 10218-2:2025 | Integration of industrial robot applications and robot cells, from design and commissioning through operation, maintenance and decommissioning | Manufacturers, integrators and users |
| ANSI/A3 R15.06-2025 | US adoption of ISO 10218-1 and -2, plus a US-developed Part 3 on use of robot cells | Manufacturers, integrators and, in Part 3, users |
| ISO 3691-4:2023 | Driverless industrial trucks and their systems, including AGVs, autonomous mobile robots, "bots", tuggers and under-cart units | Truck manufacturers, with operating-zone preparation set out in an annex |
| ANSI/A3 R15.08 Parts 1-3 | Industrial mobile robots (Part 1), their integration into systems and applications (Part 2) and their day-to-day use (Part 3) | Manufacturers, integrators and users respectively |
All of these are paid documents. This guide relies on the publishers' own scope pages and announcements, not on the clause text.
ISO 10218-1 and -2 (2025 editions)
ISO published new editions of both parts in February 2025: Part 1 as edition 3 and Part 2 as edition 2. They replace the 2011 editions [1] [2]. Part 1 sets requirements for the robot as a machine. Part 2 covers integrating it into a complete application, including end-effectors and other equipment [1] [2].
Both scope pages leave out some things that matter for warehouses. Part 1 does not cover hazards from mobility when the robot or manipulator is fixed to, or part of, a driverless industrial truck or mobile platform [1]. Part 2 does not apply to multi-purpose lifting devices such as forklift trucks [2]. A mobile manipulator, meaning an arm on an AMR, therefore needs more than one standard. Part 1 also does not apply to robots manufactured before its publication date [1].
ANSI/A3 R15.06-2025
A3 describes R15.06-2025 as the US adoption of ISO 10218-1:2025 and -2:2025 [3]. According to The Robot Report, Parts 1 and 2 were approved on August 21, 2025, a US-developed Part 3 on user requirements was approved on October 7, 2025, and the three were released together on October 29, 2025 [4]. A3 says Part 3 takes the guidance in two earlier technical reports, TR R15.506 on changes to existing robot cells and TR R15.706 on user responsibilities, and turns it into requirements [3].
A3 also lists what changed in the 2025 revision [3]:
- The standard uses "collaborative application" instead of "collaborative robot." The reasoning is that collaboration depends on the whole application, not the robot alone.
- "Safety-rated monitored stop" is now "monitored standstill."
- Both parts add cybersecurity requirements related to robot safety.
- The number of listed safety functions grows from single digits to about three dozen.
- Collaborative application content from ISO/TS 15066 is folded into Part 2.
If a submission still describes a cell as "a cobot, so no guarding," the underwriter may notice that the current standard no longer frames it that way.
ISO 3691-4:2023
ISO 3691-4 sets safety requirements, and the means of verifying them, for driverless industrial trucks and their systems. Its examples include automated guided vehicles, autonomous mobile robots, "bots", automated guided carts, tunnel tuggers and under-cart units [5]. It does not apply to trucks guided only by mechanical means, such as rails, or to remote-controlled trucks [5]. Like ISO 10218-1, it does not apply to trucks manufactured before its publication [5].
The abstract says the condition of the operating zone has a significant effect on safe operation, and that the preparations needed to eliminate the associated hazards are specified in Annex A [5]. In a 3PL, the operating zone is the operator's floor, aisles and traffic rules, so part of this standard's safety case rests on the site. ISO lists the 2023 edition as "to be revised," with a draft replacement under development [5].
ANSI/A3 R15.08
A3 published R15.08 Parts 1, 2 and 3 as a single package on April 23, 2026 [6]:
- Part 1 (2020, reaffirmed in 2026 with no technical changes) sets requirements for the individual industrial mobile robot.
- Part 2 (2023) covers integrating IMR systems and applications.
- Part 3 (new in 2026) covers the continued safe use of IMR applications in day-to-day operations, so that users can maintain acceptable risk [6].
Where OSHA fits
OSHA says there are currently no specific OSHA standards for the robotics industry. It points to general industry standards instead, including machine guarding (29 CFR 1910.212) and lockout/tagout (29 CFR 1910.147) [7]. It lists ANSI and ISO robot standards as national consensus standards and notes that they are not OSHA regulations [7]. OSHA's page still references the 2012 edition of R15.06 [7].
The document that matters most: the risk assessment
OSHA's Technical Manual chapter on industrial robot safety is the most detailed public description of what a reviewer looks at [8]. It says:
- The integrator is responsible for completing and documenting a risk assessment before commissioning and for giving the results to the employer [8].
- The employer, which is responsible under OSHA for a safe workplace, should require the integrator to provide that assessment and train employees on it. If the integrator does not, the employer should do it [8].
- Assessments should be task-based and include affected workers [8].
- New assessments should be prepared for new or modified operating or maintenance tasks [8].
- A documented risk assessment is not by itself enough to show the application protects workers [8].
For power and force limited applications, the manual says the integrator should confirm that contact forces stay within biomechanical limits. It also says the user should periodically verify that safety-function settings are still valid, for example that a speed limit has not been raised [8]. It notes that some safety functions are internal to the robot and only visible in its safety configuration, so trained people should verify them [8].
What an underwriter or loss-control rep is likely to ask
None of this is a published underwriting guideline. It is our view of the questions that follow from the standards and from OSHA's own review list [8]:
- What the robots do and where. Fixed arm, collaborative application, AMR fleet or mobile manipulator. How many, which task, which zone, and whether people share the space.
- Which standard and edition. Which standard the maker declares for the robot or truck, and which standard the integrator's risk assessment follows. For older equipment, how it was assessed: ISO 10218-1:2025 and ISO 3691-4:2023 do not apply to machines built before they were published [1] [5].
- The risk assessment itself. Who prepared it, its date, whether workers took part, and whether it was updated after the last change of task, layout or software [8].
- Safety functions and who can change them. For collaborative applications, the force and pressure test results and when the settings were last verified [8].
- Lockout/tagout and training. Written procedures, and awareness training for people who pass the cell or the AMR zone without operating it, such as warehouse staff. OSHA's review list includes this [8].
- The operating zone (AMRs). Floor condition, pedestrian routes, racking clearances and traffic rules. ISO 3691-4 puts operating-zone preparation in its own annex [5].
- Software and change control. Who pushes updates, how they are tested, and how network access is controlled. The 2025 robot standards add cybersecurity requirements [3]. If the robot's behavior comes from a learned model rather than fixed code, the underwriter may also check whether a generative AI exclusion such as CG 40 47 is on the policy. That form defines generative AI as a machine-based learning system trained on data that can create content or responses [10]. Whether a given robot falls inside that definition is a wording question for the carrier. It is covered in the CG 40 47 exclusion and robot operators.
- The contract. Who is responsible for the risk assessment, maintenance and updates under the SOW or RaaS agreement, and which additional insured endorsements were agreed. See additional insured status between robot vendors, integrators and operators.
Swiss Re's 2017 paper on robotics made the same point from the insurer's side. It said insurers need to consider the possible lack of risk assessment within their insureds' operations, and that assessments of robotic risk should include dialogue with insureds about safety, responsibility and supervision protocols [9].
What compliance does and doesn't do for insurance
Compliance with these standards is not a policy condition in the standard ISO or NCCI forms, and we know of no public rating plan that gives a credit for it. Do not tell a customer it will lower their premium. What it does do is give the underwriter a clean submission. After an injury, it also gives everyone a record of who assessed what, which is what the liability argument turns on.
Where to start
Our two-page checklist turns the questions above into a list your customer can work through with their own broker before acceptance. It covers how to describe the robot for an underwriter, which standard sits behind the risk assessment, and what to tell the insurer when the task, zone or software changes. Brokers will find the same questions line by line in placing cover for a client deploying robots.
Sources
- ISO 10218-1:2025, Robotics — Safety requirements — Part 1: Industrial robots (ISO scope page)
- ISO 10218-2:2025, Robotics — Safety requirements — Part 2: Industrial robot applications and robot cells (ISO scope page)
- A3, "ANSI, A3 Publish Revised R15.06 Industrial Robot Safety Standard" (September 10, 2025)
- The Robot Report, "A3 releases full three-part national safety standard for industrial robots" (January 13, 2026)
- ISO 3691-4:2023, Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems (ISO scope page)
- A3 Store, ANSI/A3 R15.08 Parts 1, 2 and 3 (product description)
- OSHA, Robotics — Standards
- OSHA Technical Manual, Section IV, Chapter 4: Industrial Robot Systems and Industrial Robot System Safety
- Swiss Re, "The robots are here: what that means for insurers" (Trend Spotlight, 2017)
- ISO CG 40 47 01 26, Exclusion – Generative Artificial Intelligence
How these articles are written and checked. General information, not legal advice or an interpretation of your policy. Policy forms and endorsements control. Form numbers are © Insurance Services Office, Inc. and are cited for reference.