When should a robot vendor, integrator or operator be an additional insured, and on which form?
By Siddansh Bohra, CEO, Rayon Insurance · Last reviewed
On a robot deployment, additional insured requests usually run three ways. The operator wants to be added to the integrator's policy for the install and the finished cell, the RaaS vendor wants to be added to the operator's policy for its leased equipment, and resellers want to be added to the robot maker's policy as a vendor. Each request maps to a different ISO endorsement (CG 20 10, CG 20 37, CG 20 26, CG 20 34 or CG 20 15), and each covers less than the name suggests. A certificate showing "ADDL INSD: Y" proves none of it. Only the endorsement does.
Deploying robots for a customer? Attach our two-page insurance checklist to your SOW. Get the checklist
Who asks whom on a robot deployment
| Who wants to be added | On whose policy | For what | Form that usually fits |
|---|---|---|---|
| Operator (manufacturer, 3PL) | Integrator's GL | Injury or damage caused by the integrator during installation and commissioning | CG 20 10 |
| Operator | Integrator's GL | Injury or damage from the integrator's finished work after handover | CG 20 37 |
| Operator | RaaS vendor's GL | Injury or damage caused by the vendor's ongoing service at the operator's site | CG 20 26 |
| RaaS vendor (as lessor) | Operator's GL | Injury or damage caused by the operator's maintenance, operation or use of the leased robots | CG 20 34 |
| Integrator or reseller | Robot maker's GL | Injury or damage arising out of the maker's product that the integrator distributes or sells | CG 20 15 |
The form names are ISO's. Carriers also use their own versions and blanket wordings; CG 20 34 is itself an automatic-status form that applies when a written lease requires it [5]. The wording is what matters, so ask for the endorsement itself and read it against what follows.
What each form gives, in its own words
CG 20 10, ongoing operations. It adds the scheduled person only for liability "caused, in whole or in part, by" the named insured's acts or omissions, or those of people acting on its behalf, in performing ongoing operations for that person at the scheduled location [1]. Coverage stops once all work on the project is complete, or once the part of the work that caused the injury has been put to its intended use by anyone other than another contractor on the same project [1]. For an integrator, that probably means it stops at go-live or acceptance, not at the end of the warranty period. Confirm the point with the carrier.
CG 20 37, completed operations. It covers the scheduled person for injury or damage caused, in whole or in part, by "your work" at the described location, performed for that person and included in the products-completed operations hazard [2]. An operator who needs cover for the finished cell after handover needs CG 20 37 or an equivalent on top of CG 20 10. The schedule names a location and a description of the completed operations [2], so a vague entry leaves room for argument.
CG 20 26, designated person. It covers liability caused, in whole or in part, by the named insured's acts or omissions in performing its ongoing operations or in connection with premises it owns or rents [3]. It has no completed-operations wording.
CG 20 34, lessor of leased equipment. It automatically adds anyone you lease equipment from when you have agreed in writing to add them. Cover applies only to liability caused, in whole or in part, by your maintenance, operation or use of that equipment [5]. Status ends when the lease ends, and it does not apply to an occurrence after the lease expires [5]. A RaaS agreement that requires the operator to name the vendor as additional insured is often asking for exactly this.
CG 20 15, vendors. It adds a vendor only for bodily injury or property damage arising out of the named insured's products "distributed or sold in the regular course of the vendor's business" [4]. Its exclusions matter for anyone who installs robots. The form excludes, among other things:
- Liability the vendor assumed by contract, beyond what it would have had anyway.
- Any physical or chemical change to the product that the vendor made intentionally.
- Demonstration, installation, servicing or repair operations, except operations at the vendor's own premises in connection with the sale.
- Products that the vendor has relabeled, or used as a part or ingredient of something else.
- Injury arising from the vendor's sole negligence, with limited exceptions [4].
An integrator that installs a robot on a customer's floor and builds it into a cell is close to several of those exclusions. Do not assume a vendors endorsement from the robot maker covers the integration work. Ask the maker's broker how their carrier reads them.
Three limits that apply to all of them
- "In whole or in part." All five forms tie cover to the named insured's acts, work, product or use of equipment [1] [2] [3] [4] [5]. None is written to cover the additional insured's own sole fault.
- No broader than the contract. Each form says that if a contract requires the coverage, the additional insured gets no more than the contract requires [1] [2] [3] [4] [5]. If the contract asks for "additional insured status" and nothing more, that may be all it gets.
- Limits are the lesser of the contract or the policy. Each form caps what the insurer pays for the additional insured at the amount the contract requires or the policy limit, whichever is less, and says it does not increase the policy limits [1] [2] [3] [4] [5].
Each form also says the cover applies only "to the extent permitted by law" [1] [2] [3] [4] [5]. State law can restrict risk transfer. Illinois, for example, voids promises in construction, alteration, repair or maintenance contracts to indemnify someone for their own negligence [10]. Whether a given robot installation counts as such a contract is a question for counsel.
Primary and noncontributory
Contracts often ask for the additional insured cover to be "primary and noncontributory." The ISO form for this is CG 20 01. It makes the policy primary and stops it seeking contribution from the additional insured's own insurance, but only if two conditions are met: the additional insured is a named insured on that other insurance, and you agreed in writing that your insurance would be primary and noncontributory [6].
There is a reason the request matters. The standard CG 00 01 form makes a company's own GL excess over any other primary insurance available to it as an additional insured for premises, operations or products-completed operations [7]. Read together, the two forms put the named insured's policy in front and the additional insured's own policy behind it. That only works if the endorsement is actually on the policy.
Waiver of subrogation travels with the AI request
The same insurance exhibit usually asks for a waiver of subrogation. On the GL, CG 24 04 waives the insurer's right of recovery against the scheduled person for payments arising out of your ongoing operations or completed work done under a contract with them [9]. On workers comp, WC 00 03 13 says the insurer will not enforce its right to recover from the scheduled party, where you work under a written contract that requires the waiver [9]. For an operator, a comp waiver in favor of the RaaS vendor gives up the recovery that would otherwise follow an employee injury caused by the vendor's robot. That trade is covered in who is liable when a leased robot injures an employee.
What a certificate does not do
The ACORD 25 certificate says on its face that it is issued as a matter of information only, confers no rights on the certificate holder, and does not amend, extend or alter the coverage afforded by the policies [8]. It also says that if the holder is an additional insured, the policy must be endorsed, and that a statement on the certificate does not confer rights in place of the endorsement [8]. Marketplaces ask sellers for the same thing; see Amazon seller insurance requirements.
So collect the endorsement, not just the certificate. Check that the name on the schedule matches the legal entity in the contract. Check that the form covers the period you care about: ongoing work, completed work or the lease term. Check that the primary and noncontributory and waiver endorsements are attached if the contract requires them.
One question to settle before go-live
If the operator's employee is injured and sues the integrator or RaaS vendor, that company may tender the claim to the operator's GL as an additional insured. CG 00 01 excludes bodily injury to "an 'employee' of the insured" [7], and its Separation of Insureds condition applies the insurance separately to each insured against whom a claim is made [7]. How that exclusion is applied when the injured worker is the named insured's employee, but not the additional insured's, is the kind of question to put to the carrier and to counsel before the first claim, not after.
For integrators
Integrators sit in the middle of all of this. You ask the robot maker for vendor status, your customer asks you for CG 20 10 and CG 20 37, and your SOW decides what each side has agreed. Our two-page checklist gives your customer the questions to put to their own broker before acceptance, including which endorsements to ask for and in which direction. Attach it to your SOW. Brokers placing the operator's side can use placing cover for a client deploying robots.
Sources
- ISO CG 20 10 04 13, Additional Insured – Owners, Lessees or Contractors – Scheduled Person or Organization
- ISO CG 20 37 04 13, Additional Insured – Owners, Lessees or Contractors – Completed Operations
- ISO CG 20 26 04 13, Additional Insured – Designated Person or Organization
- ISO CG 20 15 04 13, Additional Insured – Vendors
- ISO CG 20 34 04 13, Additional Insured – Lessor of Leased Equipment – Automatic Status When Required in Lease Agreement With You
- ISO CG 20 01 04 13, Primary and Noncontributory – Other Insurance Condition
- ISO CG 00 01 04 13, Commercial General Liability Coverage Form
- ACORD 25, Certificate of Liability Insurance (sample, NYC Department of Buildings)
- ISO CG 24 04 05 09, Waiver of Transfer of Rights of Recovery Against Others to Us, and NCCI WC 00 03 13, Waiver of Our Right to Recover From Others (samples)
- 740 ILCS 35/1, Illinois Construction Contract Indemnification for Negligence Act
How these articles are written and checked. General information, not legal advice or an interpretation of your policy. Policy forms and endorsements control. Form numbers are © Insurance Services Office, Inc. and are cited for reference.