Skip to content

What does the CG 21 54 wrap-up exclusion remove from a subcontractor’s own general liability on a wrapped site?

By , CEO, Rayon · Last reviewed

Often not. Once you are enrolled in an owner- or contractor-controlled insurance program, endorsement CG 21 54 on your own policy excludes your work at that project. The 01 96 edition applies whether or not the wrap-up has adequate limits or stays in effect, so the gaps are off-site work and anything that happens after the wrap’s cover ends.

Want this checked on your own certificates? Bring 50 you have already sent and keep the findings. Book a walkthrough

What does CG 21 54 exclude?

A wrap-up is one insurance program bought by the owner (an OCIP) or the general contractor (a CCIP) to cover everyone enrolled on a project [2]. Insurers do not want to cover the same work twice, so they add CG 21 54 to each enrolled contractor’s own general liability policy. What stays with you on either kind of program is set out in what you still carry yourself on an OCIP or CCIP.

The endorsement removes bodily injury and property damage arising out of your ongoing operations, and your completed work, at the location named in its schedule [1]. The 01 96 edition says the exclusion applies whether or not the wrap-up provides coverage identical to your policy, has limits adequate to cover all claims, or remains in effect [1]. Completed work here means what the coverage form calls the products-completed operations hazard: injury or damage away from premises you own or rent that arises out of work you have completed or abandoned [3].

Where does that leave a subcontractor exposed?

SituationThe wrap-upYour own policy
Work on the project site during constructionUsually respondsExcluded by CG 21 54
Fabrication or storage off siteUsually limited to the designated siteCheck whether the exclusion’s schedule reaches it
A defect claim after the wrap’s completed-work period endsNo longer in forceStill excluded under the 01 96 edition
A loss larger than the wrap’s limitsExhaustedStill excluded under the 01 96 edition
Returning to site for warranty or service workDepends on the wrap manualAsk before you go back

How do I check my own policy?

  • Open the forms schedule in your general liability policy and look for CG 21 54. Note the edition date printed after the form number.
  • Read the schedule on the endorsement itself. It names the project or location the exclusion applies to. A blanket description reaches every wrapped project you work on.
  • Ask the wrap administrator for the insurance manual and find the length of the completed-operations extension.
  • Compare that end date with how long you can be sued for defective work in the project’s state [2]. What your own policy does with damage to your completed work is in the “your work” exclusion and endorsement CG 22 94.

What can be changed?

Two things are worth asking your broker for before you enrol. First, whether the exclusion can be limited to projects where you are actually enrolled and only while the wrap-up is in force. Second, whether your excess policy follows the same exclusion. The AGC’s 2026 paper on data-center construction notes that wrap-up excess limits are often thin at data-center scale [2], which makes the second question matter more.

Equipment stored off site before it is installed is a separate question, covered in who insures switchgear, chillers and generators before they are installed. Which trades are most exposed once the wrap’s cover ends is in the trade-by-trade guide to data-center insurance problems. How the project’s builder’s risk policy treats defective work is a third, covered in LEG 2/96 and LEG 3/06: what builder’s risk pays after defective work.

Sources

  1. ISO CG 21 54 01 96, Exclusion: Designated Operations Covered by a Consolidated (Wrap-Up) Insurance Program
  2. AGC, Insurance Issues in Constructing Data Centers: A GC’s Perspective (2026)
  3. ISO CG 00 01 04 13, Commercial General Liability Coverage Form

How these articles are written and checked. General information, not legal advice or an interpretation of your policy. Policy forms and endorsements control. Form numbers are © Insurance Services Office, Inc. and are cited for reference.